Марки
 
 

 

DELIVERY AND PAYMENTS

 
СОЦИАЛНИ МРЕЖИ

    

 

    

 
Проследи поръчка
Номер на поръчка:

E-mail:

Въведете кода от картинката:

ПРОСЛЕДИ
 
Количка
0 продукта
 
ГРИЖИ ЗА КОЛАТА
 
 
 

Car Pro MetalliCut Metal Polish 150ml

Car Pro MetalliCut Metal Polish 150ml
Натиснете върху снимката за по-голям размер
Цена: 21.21€ 16.96€
Наличност: 4
Модел: Полираща паста
Марка: CAR PRO
Средна оценка: Продуктът няма оценка



Количество: ПОРЪЧАЙТЕ
The metal polish you've been waiting for has arrived! With MetalliCut, Car Pro set out to redefine the limits of a metal polish and we believe they have!  No expense was spared in the design of MetalliCut... With diamond abrasive powders to compliment the diminishing abrasive compound, Car Pro created a fast cutting metal polish that finishes down to an extreme gloss! Not only does MetalliCut save time and produce superior results in general but is safe even on soft metals!
 
 
MetalliCut is the go to metal polish for professional detailers and enthusiasts looking to improve or perfect their exhaust tips, chrome or aluminum wheels, bumpers and metal trim!  For a better than new shine, pair MetalliCut with your machine polisher and one of our polishing pads!  
Bring on the Shine and get a bottle of MetalliCut today!
 
 
Features:
Diamond & Diminishing abrasives
Produces an extreme shine!
Effective on all types of metals including stainless steel, aluminum, and chrome
Can be used by hand or machine
Safe on soft metals
Easy to use 
 
Directions:
By hand:
1. Apply a small amount of MetalliCut to a microfiber towel or wire wool depending on the metal type and goal
2. Using firm pressure, work Metallicut into the metal surface until the product becomes less opaque
3. Use a clean microfiber towel to buff away any additional residue 
4. Repeat steps 1-3 if necessary
 
By machine:
1. Apply 6-8 drops of MetalliCut to a firm foam polishing pad
2. Spread MetalliCut on the surface at speed 1-2
3. Increase to speed 3 ~ 5 until the abrasives are broken down and a high gloss is achieved
4. Using a clean microfiber towel, remove excess residue
5. Repeat steps 1-3 as necessary
 
By foam cone or buffing ball:
1. Apply a liberal amount of MetalliCut to the chosen tool.
2. Spread MetalliCut at low speed.
3. Increase the speed of the drill and use a medium to high speed until the abrasives are broken down
4. Using a clean microfiber towel, remove excess residue
5. Repeat steps 1-3 as necessary
 
Package: 150ml

Добавете коментар
Може да оставите вашият коментар, само ако сте закупили този продукт!
Пишете на кирилица!


Вашето име, фамилия и номер на поръчката, с която сте закупили продукта:


Вашият коментар: Забележка: HTML не се подържа!

Оценка: Лош            Добър

Въведете кода от картинката:

Няма допълнителни картинки за този продукт.